The category of "Commissioning & Start Up - CSU" is a wide range of activities, including but not limited to CSU philosophy, commissioning strategy, systemization, integrated CSU schedule, completion management, CSU procedure. The SPs will have the capabilities to do more than whist’s mentioned under this category. For more details please click the on the SP name above.


  • Category: Commissioning & Start-Up (CSU)
  • Est. Regist./Booking Time: 00:05 Hours
  • Address: Muscat, Oman (Map)

Service / Consultation Fee (OMR/HOUR):35

 

Description

SP / Client Free introduction

Name: OT. BL. 62bc93e07e6b0

Main Focus Area: CSU is the full process by which a completed construction of a facility and all its related components (Systems & subsystems) are transformed into fully operational assets performing to expectations and ready for final acceptance by the Asset Owner. 

The SP in the "Commissioning & Start Up - CSU" category will have the capabilities to work on; 

  • Construction - Check, install, preserve, erect, strength test and calibrate.
  • Pre-commissioning - Clean, check, inspect, energize, loop check, loop function, motor solo run, alignment, leak test, insert.
  • Commissioning - Fill, N2/He leak test, start-up sequence test, ESD test, blow-down sequence test, system run, line-up.
  • Start-up - Line up system/units, hydrocarbon introduction, establish units level, start cold circulation, start hot circulation, live ESD test, live blow-down test, re-start units, ramp up production, stabilize operation, test run, performance test, start-up & ramp up plan, Statement of Fitness, PSUA, project to asset holder transfer.

Existing Type of Employment: Freelancing

Number of years since last employed: 44

Existing / Previous Job Management Level: Middle Management

Professional Experience:

An operation professional with more than 35 years of experience in different aspect of up-stream in energy sector (Oil & Gas industry) with PDO Production Operations. Over 21 years held the Production Operation Supervisory role, during which have gained the competency and necessary skills required to effectively manage HSE, production operation facility management, Process Safety and Integrity of Plant and Facilities. And over 14 years of experience was mainly spent on facility Commissining and Start-up (CSU).

Engaged in various roles such as Site Manager Al Haditha Petroleum Services S.A.O.C, Commissioning Manager (PDO Approved) Special Technical Services & Tebodin LLC, Commissioning Lead – Operations & Process (PDO Approved) Galfar Eng. & Contracting SAOG, Production Supervisor - PDO, Commissioning Engineer - PDO.

Training Attended with PDO

  • Advanced Supervisory Skills
  • Advanced Production & Maintenance Technique
  • Local Emergency Base Control (LEBC) trained and competent. 
  • ISO - 14001 awareness. 
  • Risk Assessment within Production Operations.
  • Leading HAZOP (Hazards & Operability) training in UAE
  • M 283 Electrical Engineering Basics - Shell Training Centre - Netherlands.
  • P 267 Applied Production Technology - Shell Training Centre - Netherlands.
  • P 142 Production Surface Operations - Shell Training Centre - Netherlands.
  • P 229 Facilities Integration - Shell Training Centre - Netherlands. 
  • P 143 Well Services Operations – Shell Training - United Kingdom.
  • PDO Driving License – valid. 
  • In-house PDO Various HSE Trainings (Refer to HSE Passport)

Skills & Competencies: Production operations, Commissioning, shutdown management, engineering hook ups, Project support, staff competency assessments.

Qualification: National Diploma - United Kingdom, D32 & D33 Competence Assessor for OPITO - UK

Place of Domicile: Muscat / Asseeb

Work preference & Max. distance to work site from domicile: On-site/Online unlimited mileage

DoB: 1950

Prerequisites

  • Please click BOOK/REGISTER button and fill in the form.
  • Clients are requested to check and verify the SP's profile prior to the selection of SP and ensure it meets their requirements.
  • The selected SP's contact details will be sent to the client via email once registration/booking fees is paid.
  • The introduction (max. 1 hour) is free of charge for all clients and does not bind to hire the SP.
  • A contract/agreement between the two parties shall be generated immediately and signed by both parties after the work assignment has been agreed during the introduction.
  • For every genuine and agreed work assignment, TAF will charge a fee of double the hourly rate stipulated in the SP Registration Form, shared 50% between the SP and the client.
  • The SP will invoice directly the client according to the contract/agreement terms and conditions. No fees or a turnover commission is paid to TAF.
  • The hourly rate of the SP is as indicated in the application. Other expenses, if any, have to be agreed during the introduction.
  • Clients must commit to having an actual project/work assignment and TAF must be informed if additional SP is required for the same project.

SP Booking